Home > News > Content

Rechargeable Battery Correct Operation Method

Jun 15, 2017

Teach you how to use the rechargeable battery correctly and rationally: the newly purchased rechargeable battery is the first charge. General professional rechargeable battery factory will be set to zero power no-load state, so the new rechargeable battery must be charged before use, and the previous charge and discharge conditions directly affect the battery's future life. The correct method of operation should be, Rechargeable Battery select the conventional way to smooth charge, to ensure that each time exhausted and then fully charged.

For the full release of electricity before each charge, adhere to the "venting charge" principle. The biggest drawback of nickel-cadmium batteries is the "memory effect, that is, the battery will be charged each time," memory "down, the next time you recharge, you can only charge the last memory capacity, so if Power has not been exhausted before the half-way charge, so repeatedly, the battery capacity will shrink, over time, and gradually make the battery capacity tends to zero.

To prevent mixed mix. Due to different manufacturers of technical details and battery capacity is different. Therefore, different brands or different brands of the same brand, the capacity of the rechargeable battery can not be mixed on the same charger, Rechargeable Battery but can not be mixed on the same equipment.

At the same time, the battery can not be fully charged with the battery is being used in the process, otherwise the battery, and even equipment will have a negative impact, in addition, do not frequently take fast charging, just use the battery do not charge immediately, Rechargeable Battery this will affect or Shorten battery life.

Newly charged rechargeable batteries are more important for the first time. Usually rechargeable batteries in the factory will be set to zero charge no-load state, so the new rechargeable batteries need to be charged before use, in addition to the previous charge and discharge conditions directly affect the battery's future life. The correct method of operation should be, select the conventional way to smooth charge, as far as possible after the exhaustion and then fully charged.

First of all to adhere to the "venting charge" principle, for each charge before the full release of electricity. Nickel-cadmium batteries a great drawback is the "memory effect, that is, the battery will be charged each time when the" memory "down, the next time you recharge, Rechargeable Battery you can only charge the last memory capacity, If the charge is not exhausted before the half-way charge, so repeatedly, the battery capacity will be reduced, over time, will gradually make the battery capacity tends to zero.

Followed by blending. Because different manufacturers of different technology and battery capacity. Therefore, different brands or different brands of the same brand, the capacity of the rechargeable battery can not be mixed on the same charger, but can not be mixed on the same equipment to use.

In addition, do not frequently take fast charging, Rechargeable Battery just use the battery do not immediately charge, this will affect or shorten the battery life.