Home > News > Content

Precautions For Use Of Batteries For Lighting

Aug 04, 2017

Lighting batteries are mainly designed using AGM technology, the cathode absorption valve seal sealed lead acid lighting batteries. Ordinary series of products for a wide range of applications, Battery for Lighting suitable for a variety of start, emergency, electric toys, electric lighting and other applications under the conditions of use.

Lighting use Note:

Do not disassemble the lighting battery, so as to avoid danger, such as accidental lighting with the battery shell rupture, exposure to sulfuric acid, please rinse with plenty of water, if necessary, Battery for Lighting please seek medical attention. The same time as

When using multiple lighting batteries, pay attention to the connection between the lighting battery is correct, be careful not to short circuit. The same time as

Lighting batteries in order to use in parallel, Battery for Lighting generally not more than three groups (only) parallel, the use of the process should avoid strong vibration or mechanical damage. The same time as

For the charging and discharging of the battery, please refer to this manual or instruction manual. The same time as

Lighting batteries can not be used in closed or high temperature environment (recommended recycling temperature of 5 ~ 35 ℃). The same time as

Do not use chemical cleaning agents to clean the battery for lighting. Battery for Lighting Do not use dry cloth or duster or the like. Do not use dry cloth or duster. The same time as

Please do not let the rain shower to the lighting battery, or put the lighting battery into the water. The same time as

Use a battery pack for lighting up and down with ventilation holes for heat dissipation. The same time as

Do not mix the same capacity in the same box, Battery for Lighting different old and new, manufacturers of different lighting batteries. The same time as

Do not place the lighting battery in a place near the fire or into the fire. The same time as

Waste lighting batteries should be concentrated on the designated or by the lighting battery manufacturers to recover, do not abandon.

Widely used in electricity, telecommunications, continuous power, solar and wind energy, radio and television, defense communications, backup power, peak load compensation energy storage devices, Battery for Lighting light electric vehicles, security monitoring equipment, instruments, meters, electronic scales, emergency lighting equipment , Electric toys, flashlights, mosquito swatter and other portable electronic products and other major industries.

Product advantages Green: the plate is made of special alloy materials, does not contain the pollution of the environment and difficult to recover antimony and cadmium and other metal substances. Battery for Lighting Sealed design: double sealed structure, gel electrolyte, never leak, the use of safe and convenient process. High performance: low internal resistance, strong charge acceptance, high energy conversion rate, good seismic performance.

Environmental adaptability: can adapt to -40 ~ 65 ℃ environment, lighting batteries can be placed, there are two terminals and cable output, suitable for a variety of installation methods, especially for outdoor use. Long life: the application of a new generation of polymer colloid and thick plate design, greatly improving the battery life cycle life. Seismic performance: strong seismic performance, even in the vibration of high current work, but also to ensure the normal use of lighting batteries. Lighting battery shell with ABS material, enhanced grade flame retardant (FV0 level) for users to choose. Tips: lighting batteries need to be placed for a long time must be fully charged, usually every month to add a long, no longer, it will slowly discharge their own, until the scrapped. Therefore, at regular intervals, the battery should be charged once. Charging should not be too long, if the charger without indicator light, the battery is hot, that is too long to easily use the battery charge bad or even explosion. Do not pinch the wrong positive and negative, you may burn the charger. Red chuck corresponds to red, black corresponds to black. Lighting battery life is terminated, please keep the yo, free to abandon the cause of environmental pollution, to protect our earth mother ah.