Home > News > Content

Lighting The Battery To Avoid Strong Vibration

Jun 15, 2017

Lighting use Note:

Do not disassemble the battery, so as to avoid danger, such as accidental battery shell rupture, exposure to sulfuric acid, please rinse with plenty of water, if necessary, please seek medical attention. The following are the same as the "

When using multiple batteries, pay attention to the connection between the battery is correct, Battery for Lighting be careful not to short circuit.

If you want to use the battery in parallel, generally not more than three groups (only) in parallel, if you want to contact with my company. The following are the same as the "

The use of the process should avoid strong vibration or mechanical damage. Battery for Lighting The following are the same as the "

For the charging and discharging of the battery, please refer to this manual or instruction manual. The following are the same as the "

Lighting batteries can not be used in closed or high temperature environment (recommended recycling temperature of 5 ~ 35 ℃).

Do not use a chemical cleaning agent to clean the battery. Do not use a dry cloth or duster or the like. The following are the same as the "

Please do not let the rain poured into the lighting battery, or put the battery into the water. Battery for Lighting The following are the same as the "

Use the upper and lower battery packs with vent holes for heat dissipation. The following are the same as the "

Do not mix the same capacity in the same box, different old and new, Battery for Lighting different manufacturers of batteries. The following are the same as the "

Do not place the battery near a fire source or into a fire.

How can the lighting battery be connected to the lamp?

First determine how much light you want the light bulb, in order to determine the size of the battery with lighting.

2 lighting with a variety of batteries, commonly used are: lead-acid lighting batteries, nickel-cadmium lighting batteries, lithium batteries, etc.

3 lighting the main indicators of the battery there are two: the nominal voltage and AH, that is, (An), lead acid lighting battery standard voltage per cell is 2V, if you need 12V voltage, is 6 cells, nickel cadmium With a single battery is 1,2v, two series is 2.4V, each lithium battery voltage is 4.2v; security when the meaning is: the lighting battery is fully charged, the current to 1 amp discharge, to discharge The end of the time used by the number of time, for example: 10 amp when the lighting battery is 1 amp current discharge, the duration is 10 hours, simply speaking: type of lighting compared to the battery, the greater the number of hours, Battery for Lighting power The bigger the bigger the volume.

4 incandescent and lighting battery connection is very simple: regardless of positive and negative, the bulb of the two poles and lighting can be connected to both ends of the battery can be.