48V LFP Lithium Battery For ESS

Li-Ion LFP Battery 48V120Ah Solar Energy Storage Battery for Hybrid Wind Solar System Features: 1.Deep circle Li-Ion Lithium Battery 48V120Ah 5.8KWh battery pack with BMS 2. Lighter weight, smaller size. than normal lithiun-ion cell 3. Display: LCD for specially design 4. Environmentally...

Product Details

48V LFP Lithium Battery For ESS  

Li-Ion LFP Battery 48V 120Ah Solar Energy Storage Battery for Hybrid Wind Solar System

 

Features:

1.Deep circle Li-Ion Lithium Battery 48V120Ah 5.8KWh battery pack with BMS

2. Lighter weight, smaller size. than normal lithiun-ion cell

3. Display: LCD for specially design

4. Environmentally friendly non-toxic, non-contaminating, no rare metal.all the material pass REACH

 

Quick Detail:

 

Place of Origin: Guang dong China Brand Name: TAC
Nominal Voltage: 48V Rated Capacity: 120Ah
Type: Li-Ion Size: 700 mm * 300 mm * 600mm
Noise emission <40dB Display LCD
Color White/Black(customized) Protection Degree IP20
Weight: 75kg Certification UN, ROHS, REACH ,BIS
OEM & ODM: Support Warranty: 12months

 

 

Li-Ion LFP Battery 48V120Ah Solar Energy Storage Battery Specification:

 

Parameters PHES5.8KWh48V1
Battery Type Li-Ion
Rated Voltage/ Capacity 48V/120Ah
Rated Energy 5.8KWh
Voltage Range 45~54.7VDC
Rated Discharge Current 100A
Max. Discharge Current 135A
Standard Charge Current 30A
Max.Charge Current 60A
Operating Temperature Charge:0°C ~50°C;
Discharge -20°C~50°C;
Storage Temperature -20°C~50°C
Ambient Humidity Max. 90[%Rh] *Non Condensing
Expected Lifetime (25°C/+77℉) 5 Years
Cycle life (80% DOD, 25°C/+77℉) 2000Cycles
Max. operating altitude 2000m
Dimensions(W*H*D) 700 mm * 300 mm * 600mm
Weight 75kg
Color White/Black(customized)
Protection Degree IP20
Cooling Natural
Noise emission <40dB
Display LCD
Interface RS485/CAN

 

Li-Ion LFP Battery 48V120Ah Solar Energy Storage Battery System Display:

 

 

Application:

 

 

 

Battery Pack Parcel Pictures

 

 

 

Similar Production Picture

 

 

Safe Test

Item

 

Battery

Condition

 

Test Method

 

Requirements

 

Crush

 

Fresh,

Fully charged

 

Crush between two flat plates. Applied force is about 13kN(1.72Mpa) for 30min.

)

No explosion,

No fire

 

Short

Circuit

 

Fresh,

Fully charged

 

Each test sample battery, in turn, is to be short-

circuited by connecting the (+) and (-) terminals of the battery with a Cu wire having a maximum resistance load of 0.1Ω.Tests are to be conducted at room temperature(20±2℃ ).

 

No explosion,

No fire The Temperature of the surface of the Cells are lower than 150℃

 

Short

Circuit

 

Fresh,

Fully charged

 

Each test sample battery, in turn, is to be short-

circuited by connecting the (+) and (-) terminals of the battery with a Cu wire having a maximum resistance load of 0.1Ω.Tests are to be conducted at temperature(60±2℃ ).

 

No explosion,

No fire The Temperature of the surface of the Cells are lower than 150℃

 

Impact

 

Fresh,

Fully charged

 

A 56mm diameter bar is inlayed into the bottom of a 10kg weight. And the weight is to be dropped from a height of 1m onto a sample battery and then the bar will be across the center of the sample

No explosion,

No fire

 

Forced

Discharge

 

Fresh,

Fully charged

 

Discharge at a current of 1 C5A for 2.5h.

 

No explosion,

No fire

 

Nail

Pricking

 

Fresh,

Fully charged

 

Prick through the sample battery with a nail having a diameter of 3mm and remain 2h.

 

No explosion,

No fire

 

 

  

Inquiry