Solar Lifepo4 Battery 12V 360AH

Solar Lifepo4 Battery 12V 360AH Circle life 2000times size with customer requrie

Product Details

Solar Lifepo4 Battery 12V 360AH

12V 110AH Lithium Battery For Car And Emergency Power Supply

 

 Quick Detail:

Battery module 110Ahr or 1408Whr (316PCS IFR18650EC-1.4Ah cells in a 4S79P configuration.)
Approx. Dimension 260 mm x 158mm x 246 mm (L*W*H)
Approx. Weight 15.1kg
Nominal voltage 12.8V
Maximum voltage 14.6V
Minimum voltage 10.0V
Nominal load current 150A max. continuous current @ 23° C
Peak load current 300A max for 30 sec @ 23° C

 

 

 

 

 

 

Specification for 12V 110AH Lithium Battery For Car And Emergency Power Supply

No.

 

Item

 

General Parameter

 

Remark

 

1

Rated Capacity

 

110.0Ah

Standard discharge(0.2 C5)after standard charge(0.2 C5)

 

2

Minimal Rated

Capacity

 

105.0Ah
3

Nominal Voltage

 

12.8V  
4

Cycle Life

 

Higher than 60% of the Initial Capacity of the Cells

◆Charge: CC@0.2C to 14.6V, then CV till current to 0.05C

◆Rest: 30min.

◆Discharge: 0.2C to 10.0V

◆Temperature:20±5℃

◆Carry out 2000cycles 100%DOD

◆Carry out 3000cycles 80%DOD

◆Carry out 3500cycles 60%DOD

5

Discharge cut-off voltage

 

10.0V

 

6

Charging cut-off voltage

 

15.6V

 

7

Cell and assembly method

 

IFR18650EC-1.4AH 4S79P
8

Housing material

 

ABS+PC housing

 

 

LiFePO4 Battery Pack BMS Performance

1.Charge protection

When the Battery modules are charged to full, they will communicate with BMU, and the BMU has the capability to turn off the charger or open the main contactor. The battery module itself does not have any switch to disconnect the charger.

2.Balancing

The intra-module balancing circuit is used to compensate slight capacity imbalance among the four cell blocks within a battery module.

The inter-module balancing circuit is used to compensate slight capacity imbalance between different battery modules in series connection.

3.State of Charge Measurement

Individual cell block voltage and charge/discharge current will be used to monitor the state of charge (SOC) of the battery module. The estimated capacity used for the calculations will be adjusted to meet the capacity of the lowest capacity cell block when the battery system is fully cycled. The state of charge will be adjusted for normal self discharge of the battery system when the unit is not on charge.

4.RS-485 Communication Uplink

RS-485 Communications will be used to communicate with the Battery Management Unit (BMU) or connection to other battery Modules.

5.RS-485 Communication Downlink

RS-485 Communication connection from Downstream battery module.

6.Status LED

A Dual LED on module to indicate working status. One is green and the other one is red. Blinking of the green LED indicates that the module is working properly. Blinking of the red LED indicates that the module has failure and needs service.

 

Application

  1. Wind-Solar Energy Storage system
  2. Solar street lights
  3. Off-grid energy storage
  4. Household energy storage
  5. Telecom backup system

Packing Detail

Standard export carton, and customized packing is welcome

 

FAQ

Q1. Can I just try samples for the first order?

A: Yes, trail order is acceptable. we can sell just a few pcs for you to confirm the specifications of our products. lifepo4 prismatic cells

What is your warranty? 3.2 volt lithium phosphate battery

A: We offer 3-5 years warranty for all of our battery pack. we ensure at least 6000 cycle life for the LiFePO4 battery pack, 4000@80% DOD, You can use it for at least 10 years for normal 1 time charge and discharge every day.

Similar Production Photo

 

 

 

 

 

 

 

 

 

 

 

 

Inquiry